Pages

Wednesday, September 25, 2024

DIGGA: A GLOBAL NAME FOR QUALITY

Founded in 1981 by Stewart Wright, Digga started as a small operation in a Brisbane trailer park, supplying earthmoving wear parts to local operators. Operating out of a phone booth, Wright’s vision and determination propelled the company from humble beginnings to a global leader in drilling and piling attachments. The demand for maintaining and supplying drilling augers led to rapid growth, and by 1982, Digga had built its first small factory.

 

By the late 1980s, Digga’s expansion strategy took off with the opening of manufacturing and distribution facilities in Sydney (1989) and Melbourne (1992). This allowed the company to better support its growing customer base across Australia. But Digga’s ambitions didn’t stop there. In 1996, the company entered the North American market, initially supplying gearboxes to Original Equipment Manufacturers (OEMs) in Canada and the U.S. For over a decade, many North American operators used Digga products without realizing it, as these gearboxes were sold under different brand names.

 

This changed in 2013, when Digga established its own manufacturing facility in Dyersville, Iowa, signalling a deeper commitment to its North American customers. “We determined that manufacturing in the U.S. and being able to react quickly to our customers would be key to our success,” said Beau Ellingson, Digga’s Sales Manager. While introducing a new brand to a competitive market was challenging, Digga’s reputation for quality and performance gradually won over customers. The company expanded its dealer network and product offerings, becoming a trusted name in the industry.

 




Today, Digga is a family-owned business that manufactures screw piling drives for every torque interval up to 360,000 foot-pounds, catering to everything from mini machines to 80-tonne excavators. Digga offers complete turnkey solutions, including machine mounting, boom extensions, torque monitoring equipment, drive tools, and alignment aids. One of Digga’s key differentiators is its focus on in-house manufacturing. The company produces over 80% of its components internally, from cutting gears from solid steel to assembling final products. This full control over the production process ensures that Digga consistently delivers high-quality attachments that meet rigorous industry standards.

 

With more than 40 years in the industry, Digga continues to grow its sales in the small to mid-size anchor drive range, providing cutting-edge drilling drives across North America.

 

To read more about Digga's history, click here.

Wednesday, February 8, 2023

Digga - Into the Future

 Digga Australia: Final top 10 for the Next Level Awards Program.

CONEXPO-CON/AGG and the International Fluid Power Exposition (IFPE) have selected Digga’s new HALO auger alignment system as one of the top 10 finalists for the Next Level Awards Program.

In today's fast-paced world, it's essential to stay ahead of the curve when it comes to innovation and technology. At Digga Australia, we're doing just that by constantly improving and finding ways to innovate to ensure that our customers are receiving the most innovative, quality products that we have to offer. 

The HALO Auger Alignment System is one of these products and is the biggest advancement in Auger technology in 20 years. Its benefits will set a new standard to be adopted across the drilling industry. This alignment system features LED lights built into the hood of an auger and is designed to improve efficiency while saving money and time.
Its innovative design has also been engineered to be versatile and can be used in applications across varied situations such as drilling, screw anchoring, and shade structure foundations.
HALO is available on auger drives from Mini Machines right up to 30T Excavators. This makes it an ideal solution for contractors who are looking for a versatile and reliable tool for their excavation projects. 

Con Expo 2023 is always an exciting time for the construction industry, with companies from around the world showcasing their latest and greatest innovations. This year, Digga Australia has made a strong showing, with its Halo drive unit being selected as one of the top 10 finalists for the most innovative product award.

While the results of the award have yet to be announced, Digga Australia is already making waves with its innovative Halo drive unit. Its compact design, commitment to safety, and efficiency make it a top choice for contractors. Its recognition as a finalist at Con Expo 2023 is a testament to its potential as a leading product in the industry. The Halo drive unit is definitely sure to make a big impact in the excavation industry. 


The finalists will be announced during the show on March 14-18th and voting will be on site.
Make sure to come on down and vote for us!
You can find us at stand W43367. 





Sunday, February 27, 2022

Digga is celebrating 10 years of manufacturing in USA this year!


While Digga augers and screw piling heads have been available in the US since 1996, it wasn’t until 2012 that a dedicated manufacturing facility was built in Dyersville Iowa to better support our dealer network and our existing customers. This is the 5th manufacturing facility owned and operated by Digga around the world with another on the UK and 3 in Australia.

Established in Australia back in 1981 as an auger bit wearparts supplier, Digga soon saw a need to setup a small workshop to repair auger bits. Demand for new auger bits saw a small factory built in 1982 with augers and trenchers added to the range in the years to follow. Digga now employ around 300 people and export products to more than 60 countries worldwide.

Renowned for quality and durability, Digga attachments are almost entirely manufactured in-house, with over 80% off all components used coming out of a Digga facility. “The Digga brand has been built on quality, this is not something we’re willing to change” said Digga CEO, Alan Wade. “Manufacturing as much as possible in-house give us more control over the quality of the components we use” he added.

The 57,000 sq/ft. facility is centrally located in Dyersville, Iowa manufactures and distributes a wide range of products including single and two speed augers, hand held and pendulum  anchor drives with up to 375,000ft/lbs of torque, earth and rock auger bits, sweeper brooms, soil conditioners, stick rakes, pallet forks as well as drilling & anchoring accessories.

Looking for your next quality attachment? Contact our USA team on (563) 875 7915. Stay up to date with the latest tips & trick by Digga on our Social Media channels.

Monday, March 22, 2021

Digga Tips - Auger Bits for Drilling in Different Ground Conditions


When drilling in different ground conditions you need the right speed and the right cutting system on the auger bit to suit the different ground conditions. So which auger bit should you choose for your application? For efficient drilling on any machine requires power (torque) and down pressure.

Digga auger bits perform better at an optimal RPM against the ground conditions they are against. Similarly the auger diameter will perform better at certain speeds. For example: the larger the hole and harder the ground conditions, the slower you will need to drill. The smaller the hole and softer the ground conditions, then more speed is required. 

As a general rule we recommend the following RPM/speeds:
55-65 RPM for general earth conditions.
45-55 RPM when drilling in heavy earth, clay or shale. 
20-45 RPM when drilling in rock.
Results will depend on rock hardness, type of auger being used and machine down force.

Digga recommends the following attachments for the different ground conditions:
  • When ‘general purpose’ earth drilling you can drill faster. The Digga A range of auger bits will be ideal here. These auger bits are also better for clay as the bladed teeth ‘shaves’ the spoil a layer at a time. Like scraping butter with a knife.
  • In heavy earth, clay*, soft chalky rocks you want an auger bit with tapered teeth. The Digga RC range of auger bits is the ultimate all performance auger bit and will cut cleanly into earth and chalky rocks. The teeth are tapered to be able to rip the fracturable rocky/earthy ground. *Please note, this range is not ideal for drilling in clay with smaller machines 4 tonne and under.
  • When drilling into rock you are going to be most effective at a slower speed with a greater amount of power. Too much speed creates too much heat and will actually ‘polish’ the rock smooth rather than chipping away at it. Too much speed will also cause the teeth to skip across the top of the rock and it will not be able to pick and rip into the rock to break it out.

For more information on our auger bits visit www.diggausa.com/auger-bits or contact us at (563) 875 7915. Stay up to date with the latest tips & trick by Digga on our Social Media channels.

Thursday, February 11, 2021

How to Replace Rotating Rock Picks on Dedicated Auger Bits

Rotating rock picks, are the auger bit teeth used on our Digga dedicated rock auger bits (DR) for drilling from soft rock to hard fracturable rock.

Here are some things you can observe to determine whether the rock picks are worn: The teeth need to rotate while drilling to maintain an efficient cutting tip. The tungsten tip and tooth should be evenly pointed. Poorly maintained teeth reduce cutting efficiency and wear out faster costing time and money. We recommend you replace worn teeth immediately!

Tip: the outside teeth (C) will wear the fastest as they are travelling the greatest distance so will need replacing more often. Try swapping the outer tooth for an inner tooth to keep the wear even. Always use your best teeth on the outside pockets.

Here are some examples or rotating rock picks in various states of wear.

Tooth A has not been rotating in the pocket and as a result the tooth is uneven and will cut poorly. We recommend changing this tooth. You may also notice if the tungsten tip has been worn down and flattened, we recommend replacing the tooth.

Tooth B indicates that they have been rotating in the pocket and “self-sharpening”. Tooth is good.

Tooth C has been rotating in the pocket and wearing evenly. This tooth is still good but must be inspected regularly as it is nearing its wear life.

In summary, the best course of action would be to remove teeth A and C. Discard A and place C in the pocket vacated by A. Place a new tooth where C used to be.  

Tip: Each time the auger bit is brought out of the hole to remove spoil, use a soft copper or dead blow hammer to tap all teeth ensuring they are rotating freely in their pockets. This will encourage even wearing around the tooth.


Removing Rock Pick Auger Bit Teeth

Rock picks are found on our dedicated rock auger bits. Follow either of the below steps to remove them.

Option 1: Place a rotating pick removal tool in the groove of the rock pick. Use a hammer to strike the tool’s strike point (fig.1) to tap it out. 

Option 2: Alternatively, use a pin punch & soft head mallet on the back of the rock pick to knock it out. (Fig.2)


Installing Rock Pick Auger Bit Teeth

Once removed, clean the pocket and follow the below to replace the tooth.

1. Replace the rock pick and knock it in all the way with a soft head mallet.

Note: Rotating picks must rotate freely. Never use grease or lubricants, as this will cause dirt to bind the rock pick and prevent it from rotating.


Replacing the Auger Bit Pilot

Replacing the pilot is similar on all auger bits and a pretty much foolproof.

1. Move the auger bit into position so the cutting head is easily accessible ensuring it is stable and secure. Remove the pilot by removing the bolts holding it in place and lift it out of place. Once removed, replace it with a new one and secure it with the provided nut and bolt.


Before starting to drill, please ALWAYS ensure that all rock picks and pilot are locked in tight.

Tip: After each day, hose down your auger bit head to remove dirt / dust from around the teeth. Left alone this dirt can become as hard as concrete locking the teeth in place. Next time you’re driiling your teeth won’t rotate and you may be up for new teeth or an expensive repair.


Reach out to us should you have any trouble removing or installing your rock picks or pilot. For spare parts or service enquiries, visit our website or give us a call at (563) 875 7915.


How to Replace Tapered Auger Bit Teeth
How to Replace Tapered Auger Bit Teeth

Tuesday, February 2, 2021

How To Replace Tapered Auger Bit Teeth

Our Digga tapered auger bit teeth are defined by their tapered shape and are used on our earth/rock combo range of auger bits (RC).

Tapered teeth will wear most on the edges above the carbide tip. You may notice the teeth scalloping out around the edges and forming a crease around the tooth.  Please remember that it becomes essential to change the tooth as soon as you notice the carbide tip is either gone, chipped, damaged or cracked.

If you notice excessive wear on a single tip carbide tooth and its pocket – we recommend replacing it with a double tip carbide tooth.

Removing Tapered Auger Bit Teeth

Tapered auger bit teeth are found on our earth/rock combo auger bits. Follow these first steps to remove them.

1. Place a pin punch or centre punch in the hole at the base of the tooth holder.

2. Ensure the rounded side of the punch is facing the bottom of the pocket and the flat side against the base of the tooth.

3. Use a hammer to tap the punch into the hole to dislodge the tooth.

4. Remove the tooth.


Installing Tapered Auger Bit Teeth

Once removed, clean the pocket and follow the steps below to change the teeth.

1. Position the auger bitso the cutting head  is easily accessible. Secure it in place, to ensure it cannot fall.
2. Place the teeth in the pockets ensuring the ridge of the tooth aligns with the ridge of the pocket.

3. With the auger bit tooth placed in the pocket, knock the tooth in with a soft head mallet until the ridge of the tooth is past the top of the pocket’s ridge. Using a standard hammer will shatter the tungsten tips.
4. Ensure all teeth are secured tightly before starting to drill.


CORRECT WAY OF INSTALLING TAPERED AUGER BIT TEETH

Note, that the following configuration of double and single tip teeth, as well as the depth and direction need to be considered too.


Replacing the Auger Bit Pilot

Replacing the pilot is similar on all auger bits and a pretty much foolproof.
1. Move the auger bit into position so the cutting head is easily accessible. Remove the pilot by unbolting it. Once removed, replace it with a new one and secure it with the provided nut and bolt.

Before starting to drill, please ALWAYS ensure that all teeth and pilot are locked in tight.

There you have it. Make sure to always look after your equipment so it keeps running at its best performance. Got questions? Reach out to us should you have any trouble removing or installing your auger bit teeth. For spare parts or service enquiries, head to our website or give us a call at (563) 875 7915.

Read about how to replace Bladed Auger Bit Teeth here.

Sunday, January 24, 2021

How to Replace A-series Auger Bit Teeth (Bladed Teeth)

If your A-series auger bit teeth look anything like the below you should replace them rather sooner than later.

The tungsten tip A-Series Auger bit tooth will wear most on the leading edge of the tungsten. You should see a valley type pattern on the underside of the teeth.

In the following, you will find a guide on how remove and install worn auger bit teeth for A-series auger bits. Need to install tapered teeth or rotating rock picks? New blog entries are coming soon.


Removing Bladed Auger Bit Teeth

Bladed teeth are found on all A series earth auger bits. Follow these first steps to remove them.

1. If a nylon pin (Pinloc) is in place, remove it using a hole puncher or by breaking the pin. Pinloc is available on A4 auger bits only.

2. Place a punch in the groove on the back of the tooth, Tap on the back of the punch with a hammer to dislodge the tooth. This should also release the Rubberloc, if used.

3. If the tooth is jammed or difficult to remove, a pin punch or center punch can be placed at the base of a tooth (to dislodge it), and tapped out with a hammer.


Installing Bladed Auger Bit Teeth

Once removed we move onto replacing the teeth. Are you adding rubber or pin loc for additional hold? Then make sure to check out the rubberloc & pinloc steps below as well.

1. Place the auger bit so the head is easily accessible. Secure it in place, to ensure it cannot fall.

2. With the auger bit hub on the ground and the auger bit head facing up, turn the tooth so that the punch groove is facing up. For a more in-depth illustration, move to the bottom of the page.

3. Place the tooth in the pocket, and knock it in with a soft head mallet. A standard hammer will shatter the tungsten tips.

4. Ensure all teeth and pilot are locked in tight before starting to drill.

While the vulcanized rubber pads will hold the tooth firmly in place for most applications, we recommended that you use an additional method to secure the tooth. The following steps show you how to install the rubberloc and pinloc options.


Adding Rubberloc 

Follow these steps to add Rubberloc for additional hold.

1. Cut the rubber approximately 3mm shorter than the tooth width. Moisten the rubber in water to assist in tooth insertion. Do not use oil. 

2. Insert the cut piece of rubber through the horizontal hole inside the tooth holder. Place the teeth in the pockets.

3. With the auger bit tooth placed in the pocket, knock the tooth in with a soft head mallet.

4. The rubber folds back and compresses between holder and tooth locking the tooth firmly in position.


Adding Pinloc (A3 & A4 series auger bits only)

Follow these steps to add the Pinloc. Pinloc is used for drilling in hard to very hard soils and rock, or for tree roots where reversing the auger bit is necessary.

1. Once the teeth have been replaced according to previous steps, insert the Nylon Pin through the top of the pocket. 

2. Knock the pin in with a soft head mallet, to lock the tooth into place.



Ensure your teeth are installed correctly!

Correct way of installing bladed teeth.

When it comes to installing auger bit teeth, the right direction is crucial. Here’s how to correctly install A-series auger bit teeth.When the auger bit is in its drilling position, the cutting edge of each tooth should be pointing to the ground.


Incorrect way of installing the teeth.

The above tooth has been inserted incorrectly. Flip the tooth so that the cutting edge points towards the ground.


Note, that the following configuration of flat and chisel teeth, as well as the depth need to be considered too.

Installing the Auger Bit Pilot

Finally, removing and installing the pilot is a very simple process as follows.

1. Place the pilot on the bottom of the auger bit (in the center) and secure it with the nut and bolt.

Got questions? Make sure to reach out to us should you have any trouble removing or installing your auger bit teeth. For spare parts or service inquiries, head to our website or give us a call at (563) 875 7915.

Need to replace Tapered or Rock Pick Auger bit teeth? New blog entries are coming soon.





Wednesday, July 8, 2020

When and Why to Service Your Auger & Anchor Drives

To ensure longevity and performance, it is crucial to service your Digga drive unit and change the oil in regular intervals as advised in the operator’s manual. While you might be wondering why, we have got all the answers for you.

Why is gear oil important to ensure the longevity of my drive?

Essentially, the oil in your drive unit is independent to your hydraulic system. Meaning that the oil from your machine does not lubricate your drive unit.

As a result, your auger / anchor drive requires regular oil changes to remain in perfect working condition and to avoid damage to the gears.

What happens if my auger / anchor drive is not serviced regularly?

We have tested 3 drive units in our Hydraulic Cyclic Testing Unit where 10 years of wear and tear was simulated. Oil was changed in the drives at different intervals illustrating the wear caused by neglect. 
The images below illustrate the importance of regular servicing of your auger / anchor drive and what happens if failed to do so.

GEAR IN GOOD CONDITION

This is a gear from a drive which has been serviced as per the operators manual and shows very little wear with no more than bedin wear after 10 years of simulated augering. The oil was changed after 12 months and then every 2 years thereafter as per the operators manual.
 



 




WORN GEAR

The same drive submitted to the same workload as above over 10 years, with the oil changed only once - at 5 years. While the drive unit shows no decrease in performance, the gear shows visible wear which will deteriorate quickly, leading to total failure.









FAILED GEAR

This drive has never been serviced. The image shows the damage to the gear, which causes total failure of the gearbox.












When do I need to service my auger or anchor drive?

As advised in the operator’s manual, here is an overview of when to service your drive depending on your operating conditions.

When to Service Your Auger Drive Intervals

At Digga we offer ISO 320 Grade Mineral Oil in 0.26 gallons, 0.66 gallons and 1.3 gallon containers.

If you have any questions, please don't hesitate to contact us at www.diggausa.com/contact.php or (563) 875 7915!

Tuesday, April 7, 2020

How to Operate A Digga Sweeper Bucket Broom

Having trouble operating your Digga sweeper bucket broom? There are a few tips and tricks when it comes to brush adjustment & height, rotation direction and the broom emptying procedure. We've summarized them for you below.

Direction of travel and brush rotation

Always sweep at a high enough brush speed and low ground speed to effectively discharge the material being swept.

Brush height adjustment

Remove the handle pin, twist the handle, and replace the pin. Re-adjust the axle to the correct height using both handle adjusters. Return handles to their original position.

Correct Brush Height

Set the height of the sweeper brush so the bottom of the brush is approximately 30mm lower than the bucket cutting edge. The brush must be level.

Emptying Procedure

When the bucket requires emptying, stop the rotation of the brush, lift your loader arms and crowd the bucket forward so the Sweeper Bucket Broom hood swings away from the bucket.

Examples of Damaged Sweeper Bucket Brooms due to Incorrect Operation


If not used correctly, damage and expensive repairs can occur to the Digga bucket broom attachment. Below are some examples.


Broom 1 – Worn side rubber and side panel due to too much downward pressure and incorrect placement of the broom to the ground during operation.

Broom 2 – Worn Brush, starting to wear side panel.

Broom 3 – Worn the cutting edge (wear strip) to the point that the floor has started to wear away and edge is now non-existent. New bucket floor is required.

Broom 4 – Brush has been lowered to its maximum wear point and is now out of thread, a new brush is required.

Broom 5/6 – Strong wear to the rubber and side panel due to too much downward pressure and incorrect placement of the broom to the ground during operation.

Please always make sure to read the operators manual before operating your attachments! Should you have any questions, please don't hesitate to contact us anytime at (563) 875 7915.

Wednesday, March 18, 2020

Response to novel Coronavirus (COVID-19)


March 18, 2020


Digga North America is currently monitoring the impacts and concerns associated with the novel Coronavirus (COVID-19) very closely. In line with our core values, we are committed first and foremost to the welfare of our employees, contractors and business partners and we are taking every precaution to prevent the spread of COVID-19 to protect our community.

At this point in time, we are not aware of any significant impacts to our supply chain, however we are working closely with all our supply chain partners to monitor the situation and provide regular updates as necessary.

Given the challenging and evolving situation, we will be implementing new processes and policies as more information becomes available. Digga North America has implemented the following strategies, in line with our global business groups COVID-19 guidelines:
  • All onsite non-essential business meetings are to be postponed or rescheduled online
  • Domestic air travel is limited to essential business trips only by approval of the HR team
  • All non-essential international business travel is suspended until further notice

As a Company, we are closely monitoring the unfolding situation and we are acting on advice and statements from the Government, the Centres for Disease Control and Prevention and the World Health Organisation and following guidelines from these authorities and Federal Health Departments, as required.

Whilst our working conditions may vary over this time, our facilities are operational, and we will remain accessible at all times on via telephone on 563-875-7915, or online at www.diggausa.com.

These are tricky times for all of us, but we remain committed to doing everything we can to support our employees, customers, business partners and communities both in health and safety and day-to-day business operations.






Alan Wade
President

Wednesday, February 19, 2020

When to Replace Trencher Wear Parts

Keeping on top of your Trencher wear parts will prolong their life and keep you working efficiently for longer! So, when should you be replacing Trencher teeth? How do you know they are worn out?
At Digga we have two different tooth options. Have a look at the description and images below.
  • Tungsten Carbide Teeth: once the carbide at the tip of the tooth is gone, the tooth is ineffective. 
  • Cup teeth: once the tip starts wearing back through the tooth and you’ll notice some hard facing – that's when it will start to inhibit the ability of the chain to penetrate the ground.
Consequently, you will be labouring your machine and burning extra fuel. Make sure you exchange your wear parts regularly to avoid working inefficiently.

Further maintenance checks on your Trencher Chain

Whenever you replace teeth make sure to check your bolts as well – you don’t want to risk losing the teeth by re-using worn bolts.

Check all your spacers, make sure there is no fatigue or wear.

Check the bottom of your chain and inspect the rollers, which are also wear-points due to the constant contact of the drive sprocket and nose roller.
We recommend you take your time each day before going out to a job, to carry out these small maintenance checks – you don’t want to get caught in the middle of a job with a break down that’s going to end up impacting your performance on the job!

Got questions? Contact us at (563) 875 7915 or get in touch via infous@digga.com

Thursday, November 21, 2019

Digga Auger Bit Range

The right auger bit for the right ground condition is key to working productively. Here we have a brief overview of the 3 different 'standard' auger ranges Digga manufacture.

'A' or 'earth' range of auger bits

Digga's A auger bits are efficient in cutting through earth, clay and soft ground as it uses flat teeth to peel up the layers. Our A auger bits have 3 teeth options within the range to aid wear; the standard earth tooth, flat carbide tooth or raised carbide tooth option. 

 

'RC' or 'rock combo' auger bits

Digga's RC range of auger bits uses a tapered tooth which can be used on rocky/ earthy grounds. The tungsten tipped teeth helps to rip into the ground. 

 

'DR' or 'rock' augers bits

Dedicated rock auger bits are ideal for bursting into material such as shale or rock. They use a pick tooth to break and fracture into the ground. 

For more information on the Digga range of auger bits visit our website www.diggausa.com or check out some of our videos on YouTube

Wednesday, September 4, 2019

When to rotate picks and exchange your auger wearparts

You will at some point need to replace your auger wearparts, when is dependent on how often they are used, how they are looked after and the ground conditions they are being used.

However, the teeth on your auger bit should be changed as soon as reasonable wear is noticed and before any pocket wear occurs. The productivity of the auger bit will decrease as the efficiency of the teeth wears.

The outside teeth are travelling the greatest distance as they follow the rotation of the circumference of the augers diameter so they will wear out much quicker than those towards the centre. This is because they have not been travelling as greater distance. The most common sign of wear is to the outer tips of the tooth and this wear will follow the radius of the diameter.

If you continue to wear through your outer teeth, you will begin to wear into the pockets and the flights of the auger. It is important to check your teeth regularly to work productively and efficiently. If you find yourself in a remote location and unable to replace your worn teeth right away, try swapping the inside teeth closest to the pilot with the outside teeth so you can continue to work until you acquire new ones.

 You should also regularly check the pilot. If the pilot is worn and cannot effectively penetrate the ground then the rest of the auger will not be able to do its job. It is important to replace the pilot when wear is apparent on the tips. Below are a some images which show different levels of wear to teeth.