In order to avoid damage to your drilling drive, it is important to follow the correct drilling procedure. We recently saw a damaged bale with the lid peeled back as a result of incorrect operation.
Drilling with the cradle resting against the drive unit coupled with side load can create enough force to bend the bale or peel the lid off.
Therefore, it is essential to perform the drilling operation without resting the drive cradle against the drive unit, as shown in the picture above.
The drive unit is a pendulum hung attachment designed to swing freely left right, forward and back, which is why, when drilling correctly, the cradle should be positioned up and away from the drive unit allowing the drive and auger bit to swing freely, as shown below.
To find out more about the correct drilling procedure, consult your user manual. If you are having trouble, need replacement or service to your Digga products, please contact us at infous@digga.com or under 563 875 7915
No comments:
Post a Comment